{"id":10508,"date":"2018-09-05T23:10:02","date_gmt":"2018-09-05T23:10:02","guid":{"rendered":"https:\/\/www.moduleworks.com\/?p=10508"},"modified":"2020-08-25T14:18:51","modified_gmt":"2020-08-25T14:18:51","slug":"moduleworks-cnc-technology-protects-and-optimizes-chiron-machining-center","status":"publish","type":"post","link":"https:\/\/www.moduleworks.com\/zh-hans\/moduleworks-cnc-technology-protects-and-optimizes-chiron-machining-center\/","title":{"rendered":"ModuleWorks CNC technology protects and optimizes Chiron machining center"},"content":{"rendered":"\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Chiron Group has chosen the ModuleWorks Collision Avoidance System (CAS)<\/a> and Job Setup<\/a> as part of its new \u201cProtectLine\u201d software module which will be available for all new Chiron series. ProtectLine runs on the machine control to provide real-time collision avoidance and fast machine set up.<\/span><\/p>

\"\"<\/p>

ProtectLine takes the real axis positions, machine geometries, and workpiece position and uses the same motion data as the real servos to provide a fully integrated and visually realistic simulation of the machine kinematics, tools, jaws, clamps, and fixtures as well as the material removal process. Collision avoidance runs automatically using look-ahead motion data, allowing one-shot jobs and series production to start with 100 percent override. If a collision is detected, the machining process is stopped before an actual collision occurs for more cost-effective, right-first-time machining without expensive damage and downtime.<\/span><\/p>

For faster simulation set up, Chiron Group also uses the ModuleWorks Job Setup software.<\/span> Job Setup simplifies and accelerates data transfer from <\/span>CAD<\/a>\/CAM systems<\/a> to the CNC<\/a>. All the data required for simulating a full machine set up on the CNC (tools, holders, stock, fixtures, adapters, angular heads, target model etc.) is digitally transferred to the CNC and imported into ProtectLine. Real-time simulation with collision avoidance can start straight away. <\/span><\/p>

\u201cThe ModuleWorks CNC components are cutting edge, value-adding technology\u201d, explains Pascal Schr\u00f6der, Development Coordination Digitalization<\/span> at Chiron. \u201cThe simplified machine setup and the comprehensive collision avoidance system significantly increase the efficiency and quality of our future machining centers.\u201d<\/span><\/p>

\u201cReal-time collision avoidance is rapidly becoming an indispensable part of the machining process\u201d, explains Mark Foti, Product Manager CNC, and Machine Tools at ModuleWorks. \u201cWhen used in combination with Job Setup, the technology enhances the cost-efficiency of machining even further.\u201d<\/span><\/p>

ProtectLine will be on show on a Chiron FZ16 S five-axis machining center at the Chiron Group stand at AMB<\/a> 2018, 18-22 September 2018, Stuttgart, Germany (Hall 10, Stand 10A51). The sales release is scheduled for the first half of 2019.<\/span><\/p>

Visit ModuleWorks at IMTS 2018, AMB 2018 and JIMTOF 2018<\/b><\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t<\/i>\n\t\t\t<\/div>\n\t\t\t
\n\t\t\t\t