Adrian Brandl

CAMStylus

Virtual reality solution for the intuitive operation of CAM systems supported by Artificial Intelligence Funding agency: Bundesministerium für Forschung und Bildung (BMFB) Project Number: 01IS22006A The project “CAMStylus – Development of an AI-supported virtual reality solution for the intuitive operation of CAM systems” is funded by the Federal Ministry for Education and Research under the […]

CAMStylus Read More »

DataRamp – Adaptive and Reliable CAM

Data-based Ramp-up Acceleration for resilient Manufacturing Funding agency: Eurostars/Deutsches Zentrum für Luft- und Raumfahrt Project number: E! 115645 / 01QE2140A The project “DataRamp – Data-based Ramp-up Acceleration for resilient Manufacturing” is funded by the European Commission and the German Aerospace Center (DLR) under the project no.: E! 115645 / 01QE2140A. Details Tolerance violations during machining

DataRamp – Adaptive and Reliable CAM Read More »

Vitamine_5G

Maximizing the productivity and flexibility of blanking Funding Agency: Ministerium für Wirtschaft, Innovation, Digitalisierung und Energie des Landes Nordrhein-Westfalen / Projektträger Jülich Project Number: 2108gif020b The project “Vitamine_5G” is funded by Ministry for Economic Affairs, Innovation, Digitalisation and Energy of the State of North Rhine-Westphalia and the project management Jülich under the project no.: 2108gif020b.

Vitamine_5G Read More »

KI4Toolpath

Improving Toolpaths with Artificial Intelligence Funding agency: Bundesministerium für Bildung und Forschung (BMBF)/ Deutsches Zentrum für Luft- und Raumfahrt (DLR) Project Number: 01lS22021B The project “KI4Toolpath” is funded by the Federal Ministry for Education and Research (BMBF) and the and the German Aerospace Center (DLR) under the project no. 01lS22021B. Details One-off and small-batch productions

KI4Toolpath Read More »

Simplifying On-Control Programming

ModuleWorks announces its Next Generation Shopfloor Programming (NGSP) software that enables machine tool builders and CNC manufacturers to offer highly automated touchscreen programming as part of their proprietary on-control solutions. “A lot of parts, especially prismatic parts, are programmed directly on the CNC and we aim to help machine tool builders and controller manufacturers simplify

Simplifying On-Control Programming Read More »

FitAM

Facing the Challenges of Wire-based Manufacturing and the Climate Crisis Funding agency: Austrian Research Promotion Agency (FFG) Project Number: 41546361 The project FitAM is funded by the Austrian Research Promotion Agency (FFG) under the project number 41546361. Details Wire-based additive manufacturing (WAM) is a key contributor to reaching sustainable manufacturing and combating climate change. To

FitAM Read More »

Multi-Axis Metal Additive Manufacturing Without Support Structures

A collaborative team from Promation, ModuleWorks, and Multi-Scale Additive Manufacturing (MSAM) Laboratory of the University of Waterloo has developed and successfully tested a new method for manufacturing overhang geometries without the need for support structures. The tests were conducted at the University of Waterloo in Ontario, Canada using Laser Directed Energy Deposition (LDED). By eliminating

Multi-Axis Metal Additive Manufacturing Without Support Structures Read More »

InterQ

Digital Twins for Improved Manufacturing Funding agency: Horizon 2020 Research and Innovation Program Project Number: 958357 This project has received funding from the European Union‘s Horizon 2020 Research and Innovation Program under grant agreement No. 958357 and it is an initiative of the Factories-of-the-Future (FoF) Public Private Partnership. Details The aim of the project InterQ

InterQ Read More »

The Company’s New Business Heads

ModuleWorks announces the creation of three new senior positions as well as the successor to Heiko Weber, former Head of Digital Manufacturing. Continued growth has led to the creation of new positions which will enable ModuleWorks to deliver more highly integrated business and technology solutions to its customers. New appointments in the ModuleWorks Business Areas.From

The Company’s New Business Heads Read More »

LT Ultra-Precision Technology and ModuleWorks partner on ultra-precision machining

CAD/CAM software specialists ModuleWorks and LT Ultra, specialists for ultra-precision technology, have collaborated on a software solution for ultra-precision milling and turning. Built upon the ModuleWorks 6-axis optics kernel, the new software enhances LT Ultra’s machining platforms with automated workflows for manufacturing diverse parts with nanometer precision. LT Ultra-Precision Technology machining platform with integrated ModuleWorks

LT Ultra-Precision Technology and ModuleWorks partner on ultra-precision machining Read More »