Projekt – Additiv

AMoreDentaL

Forschung, Projekt – Additiv /

KMU-innovativ – Verbundprojekt: Abbaubares Molybdän für die Knochengeneration mit Dentalmembranen aus additiver Laserfertigung Bundesministerium für Bildung und Forschung (BMBF) FKZ: 13X5234C Kurzbeschreibung: Begründung: Molybdän ist ein hochschmelzendes Metall mit herausragenden mechanischen Eigenschaften, das überraschenderweise auch großes Potenzial für biologisch abbaubare Implantate bietet. Es vereint hohe Festigkeit, gute Biokompatibilität und einen gleichmäßigen Abbau. Eine besonders vielversprechende

AMoreDentaL Weiterlesen »

LEDA

News, Projekt – Additiv, Forschung /

Extending the service life of railroad wheels through wire-based deposition welding Funding agency:  Bundesministerium für Wirtschaft und Klimaschutz Project Number: 03EN2103D The project LEDA is funded by the Federal Ministry for Economic Affairs and Climate Action (BMWK) and the Projektträger Jülich under the project no.: 03EN2103D. Details Rail vehicle wheels are subject to life cycle-related

LEDA Weiterlesen »

RemaNet

News, Projekt – Additiv, Forschung /

Turning Old into New – Making Remanufacturing Available for Everyone Funding agency: Horizon Europe Project Number: 101138627 The project “RemaNet” is funded by the European Union within Horizon Europe under the project number 101138627. Details The need for refurbishing of worn or old parts, called remanufacturing, through a proper and more conscious use of materials

RemaNet Weiterlesen »

ORAM

News, Projekt – Additiv, Forschung /

Funding agency: Bundesministerium für Wirtschaft und Klimaschutz / DLR Projektträger Project Number: 20K2104H The project “ORAM” is funded by the Federal Ministry of Economic Affairs and Climate Action (BMWK) and the German Aerospace Center under the project no.: 20K2104H. Details High disposal costs and low material efficiency of maintenance and repair are still two factors

ORAM Weiterlesen »

MOBIDart

Projekt – Additiv, Forschung /

Funding agency: Bundesministerium für Bildung und Forschung / Projektträger Karlsruhe Project Number: 01LY2203B The project “MOBIDart” is funded by the Federal Ministry of Education and Research (BMBF) and the Projektträger Karlsruhe under the project no.: 01LY2203B. Details All levels of society are currently aiming to increase repair applications rather than replacing items, with the manufacturing

MOBIDart Weiterlesen »

Vitamine_5G

Schreibe einen Kommentar / News, Projekt – Additiv, Forschung /

Maximizing the productivity and flexibility of blanking Funding Agency: Ministerium für Wirtschaft, Innovation, Digitalisierung und Energie des Landes Nordrhein-Westfalen / Projektträger Jülich Project Number: 2108gif020b The project “Vitamine_5G” is funded by Ministry for Economic Affairs, Innovation, Digitalisation and Energy of the State of North Rhine-Westphalia and the project management Jülich under the project no.: 2108gif020b.

Vitamine_5G Weiterlesen »

FitAM

Schreibe einen Kommentar / Additive & Process Technologies, News, Projekt – Additiv, Forschung /

Facing the Challenges of Wire-based Manufacturing and the Climate Crisis Funding agency: Austrian Research Promotion Agency (FFG) Project Number: 41546361 The project FitAM is funded by the Austrian Research Promotion Agency (FFG) under the project number 41546361. Details Wire-based additive manufacturing (WAM) is a key contributor to reaching sustainable manufacturing and combating climate change. To

FitAM Weiterlesen »

Forschungscampus Digital Photonic Production – Open-Know-how-Pool (DPP-Open)

Schreibe einen Kommentar / News, Projekt – Additiv, Forschung /

Opening up Possibilities for Digital Photonic Production Funding agency: Bundesministerium für Bildung und Forschung Project Number: 13N15427 The research and development project “Forschungscampus Digital Photonic Production – Open-Know-how-Pool (DPP-Open)” is funded by the Federal Ministery for Education and Research under the project no. 13N15427. Details The project “Forschungscampus Digital Photonic Production – Open-Know-how-Pool (DPP-Open)” unites

Forschungscampus Digital Photonic Production – Open-Know-how-Pool (DPP-Open) Weiterlesen »

IDEA

Schreibe einen Kommentar / Projekt – Additiv, Forschung /

Industrialization of digital engineering and additive manufacturing (AM) Funding agency: Bundesministerium für Bildung und Forschung Project number: 13N15004 The research and development project “Industrialisierung von Digitalem Engineering und Additiver Fertigung” is funded by the Federal Ministery for Education and Research under the project no.: 13N15004. Details The overall objective of the „Industrialization of Digital Engineering and

IDEA Weiterlesen »

Contact