ModuleWorks Insider Conference

March 20 – 21, 2024
Tivoli Football Stadium, Aachen

Event Schedule

Arrival Day: 19.03.2024

Guest Arrival

17:00 - 18:00

Guided Tour of Aachen Cathedral

18:30 - 21:00

Welcome from the Board, Drinks & Snacks and Tour of the ModuleWorks Facility

Day 1: 20.03.2024

Main Stage

08:30 - 09:00

Welcome & Arrival

09:00 - 09:10

Briefing - Agenda & Exhibition Area

Speaker:

09:10 - 09:50

The Future of CAM and the Role of Partnerships

Speakers: and

09:50 - 10:20

Orchestrating Success Through Collaborative Digital Manufacturing

Speakers: and

10:20 - 10:50

Coffee Break and Exhibition Area

Main Stage

10:50 - 11:20

Target Digital Factory: Smarter Machines and Digitalization for Solving the Manufacturing Challenges on the Shop Floor

Speakers: and

11:20 - 11:50

Pulling the Tooth of Automation: Digital Dentistry

Speakers: and

11:50 - 12:20

Advanced Strategies for Multi-Axis Additive Manufacturing

Speaker:

12:20 - 13:30

Lunch Break and Exhibition Area

Main Stage
Focus: CAD/CAM

First Floor
Focus: Machine Tool Builder

Sky Box

Main Stage
Focus: CAD/CAM
First Floor
Focus: Machine Tool Builder
Sky Box
Previous slide
Next slide

13:30 - 13:55

Breakout Session 1

Revamping Simulation - Vision & Strategy

Speaker: Jasper

Next-Gen Manufacturing: A Journey Through Our Digital Factory Solutions

Speakers: and

1:1 Meeting

13:30 - 13:55

Breakout Session 1

Revamping Simulation - Vision & Strategy
View Details
13:30 - 13:55

Breakout Session 1

Next-Gen Manufacturing: A Journey Through Our Digital Factory Solutions
View Details
13:30 - 13:55

Breakout Session 1

1:1 Meeting
Book a Meeting
Previous slide
Next slide

13:55 - 14:20

Breakout Session 2

Revamping Simulation - Initiatives and New Developments

Speaker: Jasper

Cycle-Based Programming for Maximum Productivity

Speaker:

1:1 Meeting

13:55 - 14:20​

Breakout Session 2

Revamping Simulation - Initiatives and New Developments
View Details
13:55 - 14:20​

Breakout Session 2

Cycle-Based Programming for Maximum Productivity
View Details
13:55 - 14:20​

Breakout Session 2

1:1 Meeting
Book a Meeting
Previous slide
Next slide

14:20 - 14:45

Breakout Session 3

New Enhancements for Safer and More Flexible Multi-Axis Machining

Speaker:

How Can Intuitive Programming Help to Address Digital Natives and the Skills Gap?

Speaker:

1:1 Meeting

14:20 - 14:45​

Breakout Session 3

New Enhancements for Safer and More Flexible Multi-Axis Machining
View Details
14:20 - 14:45​

Breakout Session 3

How Can Intuitive Programming Help to Address Digital Natives and the Skills Gap?
View Details
14:20 - 14:45​

Breakout Session 3

1:1 Meeting
Book a Meeting
Previous slide
Next slide

14:45 - 15:10

Breakout Session 4

Programming 5-Axis Mold & Die Parts with Confidence

Speaker:

PPF - Just Another NC Code Post-Processor?

Speaker:

1:1 Meeting

14:45 - 15:10​

Breakout Session 4

Programming 5-Axis Mold & Die Parts with Confidence
View Details
14:45 - 15:10​

Breakout Session 4

PPF - Just Another NC-Code Post-Processor?
View Details
14:45 - 15:10​

Breakout Session 4

1:1 Meeting
Book a Meeting
Previous slide
Next slide

15:10 - 15:30

Coffee Break and Exhibition Area

Main Stage
Focus: CAD/CAM

First Floor
Focus: Machine Tool Builder

Sky Box

Main Stage
Focus: CAD/CAM
First Floor
Focus: Machine Tool Builder
Sky Box
Previous slide
Next slide

15:30 - 15:55

Breakout Session 5

Beyond Feeds & Speeds Wizards - Unleashing the Power with Process-Based CAM

Speaker:

Multi-Station Manufacturing: Solution for Tailored Production Systems

Speaker:

1:1 Meeting

15:30 - 15:55​

Breakout Session 5

Beyond Feeds & Speeds Wizards - Unleashing the Power with Process-Based CAM
View Details
15:30 - 15:55​

Breakout Session 5

Multi-Station Manufacturing: Solution for Tailored Production Systems
View Details
15:30 - 15:55​

Breakout Session 5

1:1 Meeting
Book a Meeting
Previous slide
Next slide

15:55 - 16:20

Breakout Session 6

3-Axis Finishing: A New Generation Toolpath Engine

Speaker:

Supporting Work Preparation - The Digital Twin for NC Programming

Speaker:

1:1 Meeting

15:55 - 16:20​​

Breakout Session 6

3-Axis Finishing: A New Generation Toolpath Engine
View Details
15:55 - 16:20​​

Breakout Session 6

Supporting Work Preparation - The Digital Twin for NC Programming
View Details
15:55 - 16:20​​

Breakout Session 6

1:1 Meeting
Book a Meeting
Previous slide
Next slide

16:20 - 16:45

Breakout Session 7

Layer by Layer: Additive Manufacturing as Part of the Process Chain

Speaker:

Empowering the Operator - Providing Simulation Capabilities on the CNC

Speaker: Jasper

1:1 Meeting

16:20 - 16:45​​​

Breakout Session 7

Layer by Layer: Additive Manufacturing as Part of the Process Chain
View Details
16:20 - 16:45​​​

Breakout Session 7

Empowering the Operator - Providing Simulation Capabilities on the CNC
View Details
16:20 - 16:45​​​

Breakout Session 7

1:1 Meeting
Book a Meeting
Previous slide
Next slide

16:45 - 17:10

Breakout Session 8

Post-Processing in a Modern CAM System

Speaker:

Guarding Availability - Protecting Machines with Real Time Digital Twins

Speaker: Jasper

1:1 Meeting

16:45 - 17:10​

Breakout Session 8

Post-Processing in a Modern CAM System
View Details
16:45 - 17:10​

Breakout Session 8

Guarding Availability - Protecting Machines with Real Time Digital Twins
View Details
16:45 - 17:10​

Breakout Session 8

1:1 Meeting
Book a Meeting
Previous slide
Next slide

17:10 - 17:35

Breakout Session 9

Special Applications in 5-Axis Machining

Speaker:

Potentials of Utilizing Sensor Data and Advanced Simulation Features on the Shop Floor

Speaker:

1:1 Meeting

17:10 - 17:35​​​

Breakout Session 9

Special Applications in 5-Axis Machining
View Details
17:10 - 17:35​​​

Breakout Session 9

Potentials of Utilizing Sensor Data and Advanced Simulation Features on the Shop Floor
View Details
17:10 - 17:35​​​

Breakout Session 9

1:1 Meeting
Book a Meeting
Previous slide
Next slide

17:35

End of Program

18:00 - 19:30

Dinner

19:30 - 22:00

Evening Program

Day 2: 21.03.2024

Main Stage

08:30 - 09:00

Welcome & Arrival

09:00 - 09:30

Collaboration Drives Success

Speakers: David, CNC Software LLC

09:30 - 10:00

Intelligent Automation of Manufacturing Processes

Speakers: Marco, up2parts

10:00 - 10:30

CAM Automation - Unleashing the Power of Cutting Tool Knowledge

Speakers: Alexander, Kennametal Inc.

10:30 - 11:00

Coffee Break and Exhibition Area

Main Stage

11:00 - 11:30

On-Site Additive Manufacturing and CNC Machining System

Speakers: Marcus, 1A Technologies

11:30 - 11:45

Set-up Break

11:45 - 12:30

Panel Discussion "The Future of Manufacturing - Is Automation the Answer?"

Moderator:
Speakers: Al, Autodesk, Inc. Paul, FANUC America Corporation Paul, Hurco Companies, Inc. Christoph, Kennametal Inc. and Yavuz, ModuleWorks

12:30 - 13:40

Lunch Break and Exhibition Area

Main Stage
Focus: CAD/CAM

First Floor
Focus: Machine Tool Builder

Sky Box

Main Stage
Focus: CAD/CAM
First Floor
Focus: Machine Tool Builder
Sky Box
Previous slide
Next slide

13:40 - 14:05

Breakout Session 10

Crafting Success Through Synergy between Tool Manufacturers and ModuleWorks

Speakers:

Closing the Loop - Leveraging the Digital Thread of Equipment Data

Speaker: Jasper

1:1 Meeting

13:40 - 14:05​

Breakout Session 10

Crafting Success Through Synergy between Tool Manufacturers and ModuleWorks
View Details
13:40 - 14:05​

Breakout Session 10

Closing the Loop - Leveraging the Digital Thread of Equipment Data
View Details
13:40 - 14:05​

Breakout Session 10

1:1 Meeting
Book a Meeting
Previous slide
Next slide

14:05 - 14:30

Breakout Session 11

Cutting-Edge Technology: Innovation in 3-Axis Roughing

Speaker:

Visual Twin & Trainer: Two Aspects of One Solution for Sales, Marketing and Education

Speaker:

1:1 Meeting

14:05 - 14:30​

Breakout Session 11

Cutting-Edge Technology: Innovation in 3-Axis Roughing
View Details
14:05 - 14:30​

Breakout Session 11

Visual Twin & Trainer: Two Aspects of One Solution for Sales, Marketing and Education
View Details
14:05 - 14:30​

Breakout Session 11

1:1 Meeting
Book a Meeting
Previous slide
Next slide

14:30 - 14:55

Breakout Session 12

Ready for the Future - Solid Foundation for a Versatile and Changing Software Landscape

Speakers:

FFF First Time Right - Simulate & Print

Speakers:

1:1 Meeting

14:30 - 14:55​​​​

Breakout Session 12

Ready for the Future - Solid Foundation for a Versatile and Changing Software Landscape
View Details
14:30 - 14:55​​​​

Breakout Session 12

FFF First Time Right - Simulate & Print
View Details
14:30 - 14:55​​​​

Breakout Session 12

1:1 Meeting
Book a Meeting
Previous slide
Next slide

14:55 - 15:15

Coffee Break and Exhibition Area

Main Stage
Focus: CAD/CAM

First Floor
Focus: Machine Tool Builder

Sky Box

Main Stage
Focus: CAD/CAM
First Floor
Focus: Machine Tool Builder
Sky Box
Previous slide
Next slide

15:15 - 15:40

Breakout Session 13

Closing the Loop with MDES - Open & Accessible

Speaker: Jasper

WAAM-Focused Generative Design Optimization

Speakers:

1:1 Meeting

15:15 - 15:40​​​​​

Breakout Session 13

Closing the Loop with MDES - Open & Accessible
View Details
15:15 - 15:40​​​​​

Breakout Session 13

WAAM-Focused Generative Design Optimization
View Details
15:15 - 15:40​​​​​

Breakout Session 13

1:1 Meeting
Book a Meeting
Previous slide
Next slide

15:40 - 16:05

Breakout Session 14

ModuleWorks Magic: Crafting Prismatic Parts Made Simple

Speaker:

Digital Factory 2030 - Part 1

Speaker:

1:1 Meeting

15:40 - 16:05​

Breakout Session 14

ModuleWorks Magic: Crafting Prismatic Parts Made Simple.
View Details
15:40 - 16:05​

Breakout Session 14

Digital Factory 2030 - Part 1
View Details
15:40 - 16:05​

Breakout Session 14

1:1 Meeting
Book a Meeting
Previous slide
Next slide

16:05 - 16:30

Breakout Session 15

Measurements Matter

Speaker:

Digital Factory 2030 - Part 2

Speaker:

1:1 Meeting

16:05 - 16:30​

Breakout Session 15

Measurements Matter
View Details
16:05 - 16:30​

Breakout Session 15

Digital Factory 2030 - Part 2
View Details
16:05 - 16:30​

Breakout Session 15

1:1 Meeting
Book a Meeting
Previous slide
Next slide

Main Stage

16:30 - 16:45

Farewell

Speaker:

16:45 - 17:45

1:1 Meetings

17:45

End of Program

The Future of CAM and the Contribution of the MIC Event

The MIC aims to bring together the key players in the CAM community. Let’s look at the future of CAM technology and consider how this community can work together to make it a reality.

Main Stage, 20.03.2024 09:10

Dr. Yavuz Murtezaoglu

Founder & Managing Director

Yavuz is the Founder and Managing Director of ModuleWorks. He has 30 years’ experience in 5-Axis CAM development and a PhD in Multi-Axis Additive Manufacturing.
For his contribution to production engineering, he was awarded by CIRP with the “General Nicolau” Industry Award.

Dr. David Plater

Technical Director

David has been the Technical Director of ModuleWorks since 2007. With over 30 years’ CAM experience and a PhD in 3-Axis Machining, David previously worked in development, marketing and management positions at Delcam, MachineWorks and EdgeCam.

Orchestrating Success Through Collaborative Digital Manufacturing

As the convergence of hardware and software manufacturers intensifies, their mutual dependence grows stronger. ModuleWorks is actively spearheading initiatives to navigate and leverage this evolving landscape, while simultaneously advancing software capabilities and embracing enhanced automation.

Main Stage, 20.03.2024 09:50

Julia Meyer-Hendricks

Head of Business Development - Digital Manufacturing

Julia is Head of Business Development for the Digital Manufacturing business area. She joined ModuleWorks in 2013 and holds a Bachelor’s degree in Sales Engineering.

julia@moduleworks.com

Sebastian Wallraff

Head of Technology - Digital Manufacturing

Sebastian is Head of Technology for Digital Manufacturing. He has been with ModuleWorks since its start-up, working on engineering applications and product management. He now focusses on the customer and business side of the company.

sebastian@moduelworks.com

Target Digital Factory: Smarter Machines and Digitalization for Solving the Manufacturing Challenges on the Shop Floor

Navigating the complexities of manufacturing, inherently time and cost-intensive, unveils vast opportunities for those adept at effectively addressing challenges. Unleash the potential inherent in this intricate landscape, where strategic solutions pave the way for significant rewards.

Main Stage, 20.03.2024 10:50

Fabian Tarara

Head of Business Development - Digital Factory

Fabian is an ambitious sales professional dedicated to advancing digital transformation in manufacturing. He currently serves as Head of Business Development for Digital Factory and joined ModuleWorks in 2013. He holds a Bachelor’s degree in Industrial Engineering and a Master’s in Sales Management.

fabian@moduleworks.com

Dr. Sven Odendahl

Head of Technology - Digital Factory

Sven has been Head of Technology for the Digital Factory business area since 2023. With a background in simulating machining processes and a PhD in Mechanical Engineering, he joined ModuleWorks in 2015 to work on customer integration projects before becoming leader of the Collision Avoidance team.

sven@moduleworks.com

Pulling the Tooth of Automation: Digital Dentistry

Automated, push-button CAM for dental restoration manufacturing has become a fundamental, established part of global digital dentistry. As industrial manufacturing is still catching up to harness automation and address labor and skill shortages, the fast pace of digital dentistry opens the door to pioneering technologies enabling further automation opportunities.

Main Stage, 20.03.2024 11:20

Soroosh Eghbali

Head of Business - CAM Automation

Soroosh is a mechanical & mechatronics engineer with an MBA. He joined ModuleWorks 16 years ago. Now he is Head of the CAM Automation & Digital Dentistry business area and leads a team that delivers automated CAM solutions to partners.

soroosh@moduleworks.com

Ben Weber

Head of Strategic Partnerships

Ben joined ModuleWorks in 2015 and is Head of Strategic Partnerships. Ben has a background in mechanical engineering and experience in developing global partnerships with manufacturing software and hardware vendors with a focus on business development for Digital Dentistry.

ben@moduleworks.com

Advanced Strategies for Multi-Axis Additive Manufacturing

Optimized printing without support structures on freeform surfaces.

Main Stage, 20.03.2024 11:50

Lothar Glasmacher

Project Director, Head of Additive & Process Technologies

Lothar is an aerospace engineer and computer scientist and was Head of CAx-Technologies at Fraunhofer IPT until 2014. At ModuleWorks, he is responsible for customer technology projects and has been Head of Business for the Additive & Process Technologies business area since 2019.

lothar@moduleworks.com

Revamping Simulation - Vision & Strategy

Discover how the ModuleWorks Manufacturing Simulation Portfolio is evolving to help you create more value.

Main Stage, 20.03.2024 13:30, Session 1

Jasper Sanders

Principal Product Manager - Simulation

Jasper has been steering the Simulation Portfolio as Principal Product Manager since the beginning of 2023. He joined ModuleWorks in 2020 with a background in CNC automation, industry software and technology management.

jasper@moduleworks.com

Next-Gen Manufacturing: A Journey Through Our Digital Factory Solutions

Explore our Next-Gen Manufacturing solutions for the shop floor. Navigate through our Digital Factory solutions portfolio, showcasing innovative technologies for digitalizing manufacturing processes to enhance efficiency and productivity.

First Floor, 20.03.2024 13:30, Session 1

Dr. Sven Odendahl

Head of Technology - Digital Factory

Sven has been Head of Technology for the Digital Factory business area since 2023. With a background in simulating machining processes and a PhD in Mechanical Engineering, he joined ModuleWorks in 2015 to work on customer integration projects before becoming leader of the Collision Avoidance team.

sven@moduleworks.com

Fabian Tarara

Head of Business Development - Digital Factory

Fabian is an ambitious sales professional dedicated to advancing digital transformation in manufacturing. He currently serves as Head of Business Development for Digital Factory and joined ModuleWorks in 2013. He holds a Bachelor’s degree in Industrial Engineering and a Master’s in Sales Management.

fabian@moduleworks.com

Revamping Simulation - Initiatives and New Developments

Catch on to recent and upcoming developments that help you provide your users with faster, more reliable and more valuable simulation solutions.

Main Stage, 20.03.2024 13:55, Session 2

Jasper Sanders

Principal Product Manager - Simulation

Jasper has been steering the Simulation Portfolio as Principal Product Manager since the beginning of 2023. He joined ModuleWorks in 2020 with a background in CNC automation, industry software and technology management.

jasper@moduleworks.com

Cycle-Based Programming for Maximum Productivity

Elevate machining efficiency with cycle-based programming, incorporating cutting-edge toolpaths for Adaptive Milling/Turning, PrimeTurn, B-Axis Turning, Deburring and 2.5 D programming. This transformative approach optimizes cycle times, tool life and precision to propel machining to new levels.

First Floor, 20.03.2024 13:55, Session 2

Shashikant Potdar

Senior Product Manager

Shashi studied Mechanical Engineering and has 23 years of professional experience in CAD/CAM and machining. He joined ModuleWorks in 2014 and now works as a Senior Product Manager for Turning and the NC Editor.

shashi@moduleworks.com

New Enhancements for Safer and More Flexible Multi-Axis Machining

Overview of the latest architectural and functional enhancements to the 5-axis core components that provide the flexibility to meet the needs of ModuleWorks’ diverse toolpath customer base. 

Main Stage, 20.03.2024 14:20, Session 3

Dr. Christian Klingelhöller

Principal Product Manager

Christian is Product Manager for 5-axis toolpath calculations at ModuleWorks. Before joining ModuleWorks in 2016, he worked as a software developer. Part of his doctoral thesis was on 5-axis grinding of CFRP.

christiank@moduleworks.com

How Can Intuitive Programming Help to Address Digital Natives and the Skills Gap?

The manufacturing industry is facing a huge skills gap which will lead to massive opportunity costs if not addressed properly. Therefore, we are developing intuitive and embeddable programming capabilities to empower digital natives to efficiently program machine tools.

First Floor, 20.03.2024 14:20, Session 3

Sebastian Viebach

Principal Product Manager - Automation

Sebastian studied Technical Engineering and Management alongside his work, which amounts to more than 20 passionate years of manufacturing knowledge. He leads the Automation Portfolio in the Product Division.

sebastianv@moduleworks.com

Programming 5-Axis Mold & Die Parts with Confidence

ModuleWorks introduces a specialized module for streamlined, easy-to-use 5-axis machining that reduces setups and machining time and increases precision for half the manufacturing world.

Main Stage, 20.03.2024 14:45, Session 4

Niren Deshmukh

Principal Product Manager

Niren is Product Portfolio Manager for toolpaths at ModuleWorks. He has 24 years’ experience in CAD/CAM, reverse engineering and inspection software. For the last 16 years, he has been working in product management at ModuleWorks for 3-axis, 2-axis and turning toolpaths.

niren@moduleworks.com

PPF - Just Another NC-Code Post-Processor?

A combination of effective debugging and testing, high-speed processing of 50,000 toolpath points per second and advanced computing technologies such as edge computing and streaming is fundamental to meeting the requirements of complex machines and robots with intricate kinematics.

First Floor, 20.03.2024 14:45, Session 4

Lothar Glasmacher

Project Director, Head of Additive & Process Technologies

Lothar is an aerospace engineer and computer scientist and was Head of CAx-Technologies at Fraunhofer IPT until 2014. At ModuleWorks, he is responsible for customer technology projects and has been Head of Business for the Additive & Process Technologies business area since 2019.

lothar@moduleworks.com

Beyond Feeds & Speeds Wizards - Unleashing the Power with Process-Based CAM

Get an overview of our process-based roughing and how it addresses industry challenges such as navigating the skills gap, personnel shortages and boosting productivity.

Main Stage, 20.03.2024 15:30, Session 5

Niren Deshmukh

Principal Product Manager

Niren is Product Portfolio Manager for toolpaths at ModuleWorks. He has 24 years’ experience in CAD/CAM, reverse engineering and inspection software. For the last 16 years, he has been working in product management at ModuleWorks for 3-axis, 2-axis and turning toolpaths.

niren@moduleworks.com

Multi-Station Manufacturing: Solution for Tailored Production Systems

Are you a machine tool builder? Do you focus on complex and customized manufacturing workflows? Our versatile software framework empowers you to bring your environment to the next level.

First Floor, 20.03.2024 15:30, Session 5

Dr.-Ing. Markus Frings celebrates his achievements in fluid mechanics and software development as a doctor of engineering from RWTH Aachen University and his role in the ModuleWorks Industry Team.

Dr. Markus Frings

Team Leader Software Development

Markus studied Computational Engineering Sciences, followed by a PhD in Mechanical Engineering. He joined ModuleWorks in 2019. With over 10 years’ experience working in interdisciplinary teams, he leads the development of an automation framework for manufacturing.

markusf@moduleworks.com

3-Axis Finishing: A New Generation Toolpath Engine

Dive into the ModuleWorks 3-axis toolpath engine for a glimpse into advanced machining technology, effortless toolpath generation and dynamic safety checks – Where Innovation Meets Productivity Optimization.

Main Stage, 20.03.2024 15:55, Session 6

Amod Onkar

Vice President – Milling Products, SolidCAM Ltd.

Amod brings 27 years of CAD/CAM expertise, focusing on 3-axis and 5-axis solutions, training and global distribution. With a background in Tool and Die technology and roles at Cimatron Ltd. and Tebis, he excels in leadership and innovation, committed to delivering excellence and value in CAD/CAM technology.

Supporting Work Preparation - The Digital Twin for NC Programming

Learn how ModuleWorks simulation technologies help your customers operate their machinery more efficiently by fixing NC programming errors close to where they occur.

First Floor, 20.03.2024 15:55, Session 6

Shashikant Potdar

Senior Product Manager

Shashi studied Mechanical Engineering and has 23 years of professional experience in CAD/CAM and machining. He joined ModuleWorks in 2014 and now works as a senior Product Manager for Turning and the NC Editor.

shashi@moduleworks.com

Layer by Layer: Additive Manufacturing as Part of the Process Chain

How ModuleWorks helps you enhance your CAM portfolio with additive toolpath planning. 

Main Stage, 20.03.2024 16:20, Session 7

Lothar Glasmacher

Project Director, Head of Additive & Process Technologies

Lothar is an aerospace engineer and computer scientist and was Head of CAx-Technologies at Fraunhofer IPT until 2014. At ModuleWorks, he is responsible for customer technology projects and has been Head of Business for the Additive & Process Technologies business area since 2019.

lothar@moduleworks.com

Empowering the Operator - Providing Simulation Capabilities on the CNC

Explore the transformative capabilities of ModuleWorks simulation technologies, empowering machine operators and elevating the resilience of your customer’s shop floor.

First Floor, 20.03.2024 16:20, Session 7

Jasper Sanders

Principal Product Manager - Simulation

Jasper has been steering the Simulation Portfolio as Principal Product Manager since the beginning of 2023. He joined ModuleWorks in 2020 with a background in CNC automation, industry software and technology management.

jasper@moduleworks.com

Post-Processing in a Modern CAM System

Get to know our Post Processor Framework (and library), its latest enhancements and a glimpse into the future of posting.

Main Stage, 20.03.2024 16:45, Session 8

Lothar Glasmacher

Project Director, Head of Additive & Process Technologies

Lothar is an aerospace engineer and computer scientist and was Head of CAx-Technologies at Fraunhofer IPT until 2014. At ModuleWorks, he is responsible for customer technology projects and has been Head of Business for the Additive & Process Technologies business area since 2019.

lothar@moduleworks.com

Guarding Availability - Protecting Machines with Real Time Digital Twins

Discover how ModuleWorks simulation technologies protect your machines, reduce costs and ensure availability to optimize your customer’s production.

First Floor, 20.03.2024 16:45, Session 8

Jasper Sanders

Principal Product Manager - Simulation

Jasper has been steering the Simulation Portfolio as Principal Product Manager since the beginning of 2023. He joined ModuleWorks in 2020 with a background in CNC automation, industry software and technology management.

jasper@moduleworks.com

Special Applications in 5-Axis Machining

A glimpse at how special applications stand out from core components and how they benefit each other. 

Main Stage, 20.03.2024 17:10, Session 9

Dr. Christian Klingelhöller

Principal Product Manager

Christian is Product Manager for 5-axis toolpath calculations at ModuleWorks. Before joining ModuleWorks in 2016, he worked as a software developer. Part of his doctoral thesis was on 5-axis grinding of CFRP. 

christiank@moduleworks.com

Potentials of Utilizing Sensor Data and Advanced Simulation Features on the Shop Floor

Sensors in machine tools are providing more and more information during the machining process. This technology can be leveraged not only for standard monitoring operations, but also to unlock new possibilities when combined with the ModuleWorks simulation products.

First Floor, 20.03.2024 17:10, Session 9

Dr. Sven Odendahl

Head of Technology - Digital Factory

Sven has been Head of Technology for the Digital Factory business area since 2023. With a background in simulating machining processes and a PhD in Mechanical Engineering, he joined ModuleWorks in 2015 to work on customer integration projects before becoming leader of the Collision Avoidance team.

sven@moduleworks.com

Collaboration Drives Success

Dave Boucher and ModuleWorks – Dave reveals insights into the longstanding partnership as a model for success in the manufacturing industry. Emphasizing the significance of personal connections and collaborative efforts in driving innovation and growth.

Main Stage, 21.03.2024 09:00

David Boucher

Chief Product Officer, CNC Software LLC

David is the Chief Product Officer at CNC Software. He has over 30 years’ experience in the CAD/CAM industry and has held senior development, product and marketing roles during his career with a CAD/CAM vendor. David has been with CNC Software since 2010.

Intelligent Automation of Manufacturing Processes

The self-learning co-pilot of up2parts enables manufacturing companies to automate their work preparation and CAM programming based on semantic CAD models with Artificial Intelligence and a continuous feedback loop.

Main Stage, 21.03.2024 09:30

Marco Bauer

CEO, up2parts GmbH

Marco started at MAB in 2010 as a job shopper. As the company grew, he began to re-think manufacturing processes and in 2019 he founded up2parts as a spin-off. Their cloud-based solutions increase efficiency and reduce costs through digitalization, catering for batch sizes as small as one.

CAM Automation - Unleashing the Power of Cutting Tool Knowledge

Metal cutting expertise is trapped in cutting tool companies and among end-users. Join Kennametal in building a knowledge-powered future. We offer a clear vision for seamlessly embedding and sharing this valuable know-how between multiple partners.

Main Stage, 21.03.2024 10:00

Dr. Alexander Krödel

R&D Manager, Kennametal Inc.

Alexander is R&D Manager for Global Tooling Systems at Kennametal and is also responsible for global manufacturing technologies with the Digital Manufacturing Team. Before joining Kennametal, he was department head at the Institute for Manufacturing Technology and Machine Tools (IFW) in Hanover. 

On-Site Additive Manufacturing and CNC Machining System

Manufacturing mobility and flexibility are becoming more important for repair and spare parts production. An innovative mobile factory solution fits the requirements to enhance production, even for complex structures. 

Main Stage, 21.03.2024 11:00

Marcus Witt

CTO / Managing Director, 1A Technologies - On-Site Additive Manufacturing

Marcus is the CTO of METROM Mechatronische Maschinen GmbH and Managing Director of 1A Technologies UG for the industrialization of software and components for 3D printing, including the SEAM process, which is patented by Fraunhofer IWU, and the HY5CAM CADCAM software for 3D printing and machining.

Panel Discussion "The Future of Manufacturing - Is Automation the Answer?"

Main Stage, 21.03.2024 11:45

Al Whatmough

Director of Product Management, Digital Manufacturing, Autodesk, Inc.

Al is the Director of Product Management for Manufacturing at Autodesk. A machinist by trade with experience running companies in the CAD/CAM industry, Al is committed to driving innovation, enhancing the user experience, and revolutionizing the design, development and manufacturing of products.

Paul Webster

Director, FANUC America Corporation

Paul joined FANUC America Corporation in 2010 and leads the Factory Automation (FA) engineering support team for the Americas, developing software, hardware and custom applications for MTB and end-users. He is responsible for the FA product portfolio and development direction in the Americas.

Dr. Paul J. Gray

Vice President, R&D and Product Development, Hurco Companies Inc.

Paul is VP of R&D at Hurco. He joined in 2005, expanding Hurco’s 5-axis technology and addressing skilled labor challenges with robotic integrations. Driven by innovation, Paul has founded an AI research program, authored 15 patents, and actively pursues strategic partnerships and new technologies.

Dr. Christoph Gey

Vice President, Kennametal Inc.

Christoph has a Dr.-Ing. in Production Engineering from Hanover University. As R&D Manager at Balzers AG, he developed thin film coatings for cutting tools. Since 2007 he has worked for Kennametal Inc. and is Vice President Metal Cutting Technology at their European Headquarters in Switzerland.

Dr. Yavuz Murtezaoglu

Founder & Managing Director

Yavuz is the Founder and Managing Director of ModuleWorks. He has 30 years’ experience in 5-axis CAM development and a PhD in Multi-Axis Additive Manufacturing. For his contribution to production engineering, he was awarded by CIRP with the “General Nicolau” Industry Award.

Crafting Success Through Synergy between Tool Manufacturers and ModuleWorks

Explore our Advanced Turning Portfolio and the art of infusing tool supplier wisdom with CAM strategies.

Main Stage, 21.03.2024 13:40, Session 10

Sebastian Wallraff

Head of Technology - Digital Manufacturing

Sebastian is Head of Technology for Digital Manufacturing. He has been with ModuleWorks since its start-up, working on engineering applications and product management. He now focusses on the customer and business side of the company.

sebastian@moduleworks.com

Closing the Loop - Leveraging the Digital Thread of Equipment Data

See how the ModuleWorks Manufacturing Data Exchange Specification makes digital representations of manufacturing equipment available on the shop floor and how it feeds information back to the CAM office.

First Floor, 21.03.2024 13:40, Session 10

Jasper Sanders

Principal Product Manager - Simulation

Jasper has been steering the Simulation Portfolio as Principal Product Manager since the beginning of 2023. He joined ModuleWorks in 2020 with a background in CNC automation, industry software and technology management.

jasper@moduleworks.com

Cutting-Edge Technology: Innovation in 3-Axis Roughing

ModuleWorks is enhancing the robustness, safety and speed of its 3-axis engine, prioritizing precision and reliability in both programming and machining. Follow our journey towards exciting advancements on the horizon for 3-axis roughing.

Main Stage, 21.03.2024 14:05, Session 11

Niren Deshmukh

Principal Product Manager

Niren is Product Portfolio Manager for toolpaths at ModuleWorks. He has 24 years’ experience in CAD/CAM, reverse engineering and inspection software. For the last 16 years, he has been working in product management at ModuleWorks for 3-axis, 2-axis and turning toolpaths.

niren@moduleworks.com

Visual Twin & Trainer: Two Aspects of One Solution for Sales, Marketing and Education

Visual Twin offers an immersive “As Real As It Gets” machine simulation, making it an ideal platform to convincingly showcase your machines. Beyond this, as a Visual Trainer, it is an intuitive tool to effectively bridge the industry’s skills gap and train the next generation of machine operators.

First Floor, 21.03.2024 14:05, Session 11

Fabian Tarara

Head of Business Development - Digital Factory

Fabian is an ambitious sales professional dedicated to advancing digital transformation in manufacturing. He currently serves as Head of Business Development for Digital Factory and joined ModuleWorks in 2013. He holds a Bachelor’s degree in Industrial Engineering and a Master’s in Sales Management.

fabian@moduleworks.com

Ready for the Future - Solid Foundation for a Versatile and Changing Software Landscape

There is an ongoing technological push for innovation. Learn how ModuleWorks builds a foundation that enables you to respond more easily and quickly to technological trends and challenges. 

Main Stage, 21.03.2024 14:30, Session 12

Bastian Pranzas

Development Director

Bastian is the Development Director of ModuleWorks. Since joining ModuleWorks in 2007, he has been in senior development and management roles. He worked on CAM algorithms for a variety of applications such as multiblade and ultraprecision machining.

bastian@moduleworks.com

FFF First Time Right - Simulate & Print

Unlocking the power of digital manufacturing with physics-based software tools. By understanding the polymer physics of the material extrusion based 3D printing process we can drive better process decision making, leading to significantly lower AM costs & greater material choice for manufacturers.

First Floor, 21.03.2024 14:30, Session 12

David Simon Hartmann

CEO / Founder, Helio Additive

In 2013, David started deepening his knowledge & network in digital manufacturing at Covestro, in particular 3D printing. In 2020 he founded Helio Additive to help make digital manufacturing scalable. He is also the author of ‘Complexity is Free’, a sci-fi novel.

Closing the Loop with MDES - Open & Accessible

Discover practical examples of how the ModuleWorks open Manufacturing Data Exchange Specification (MDES) enables seamless data flow in manufacturing.

Main Stage, 21.03.2024 15:15, Session 13

Jasper Sanders

Principal Product Manager - Simulation

Jasper has been steering the Simulation Portfolio as Principal Product Manager since the beginning of 2023. He joined ModuleWorks in 2020 with a background in CNC automation, industry software and technology management.

jasper@moduleworks.com

WAAM-Focused Generative Design Optimization

WAAM is promising for many sectors (automotive, aerospace, defense) due to its material-deposition rate, scalability and combinability with other manufacturing processes. Rafinex Generative Design Optimization delivers WAAM-optimized components with low-cycle times and robust structural performance.

First Floor, 21.03.2024 15:15, Session 13

André A.R. Wilmes, PhD

CEO, Rafinex S.a.r.l.

André is the CEO of Rafinex. He has researched numerical methods for composite nano-materials at Imperial College and given seminars at NASA. He was an R&D manager, developing simulation methods and experimental prototype processes ranging from fracture mechanics to optics.

ModuleWorks Magic: Crafting Prismatic Parts Made Simple

Let’s talk about manufacturing simple prismatic parts and how ModuleWorks can help you with these. We will also look at some trends and try to understand and learn from them.

Main Stage, 21.03.2024 15:40, Session 14

Sebastian Viebach

Principal Product Manager - Automation

Sebastian studied Technical Engineering and Management alongside his work, which amounts to more than 20 passionate years of manufacturing knowledge. He leads the Automation Portfolio in the Product Division.

sebastianv@moduleworks.com

Digital Factory 2030 - Part 1

How will we be producing parts in 2030? 2018 is as far behind us as 2030 is ahead. Manufacturing will continue to progress at a realistic pace. Let us use this forum to discuss the trends and the way we as a community see things moving forward.

First Floor, 21.03.2024 15:40, Session 14

Miguel Tobias Johann

Product Director

Miguel leads the Product Management Division at ModuleWorks. He has a rich background in CAM software: from programming to working as a post- and pre-sales engineer at a software reseller in Brazil, as a reseller support manager in England and a CAM product manager in France.

miguel@moduleworks.com

Measurements Matter

The use of touch probes for measurements in CNC machines is complex. We explain the benefits as well as the challenges of these methods and introduce our new probing product.

Main Stage, 21.03.2024 16:05, Session 15

Sebastian Viebach

Principal Product Manager - Automation

Sebastian studied Technical Engineering and Management alongside his work, which amounts to more than 20 passionate years of manufacturing knowledge. He leads the Automation Portfolio in the Product Division.

sebastianv@moduleworks.com

Digital Factory 2030 - Part 2

How will we be producing parts in 2030? 2018 is as far behind us as 2030 is ahead. Manufacturing will continue to progress at a realistic pace. Let us use this forum to discuss the trends, and the way we as a community see things moving forward.

First Floor, 21.03.2024 16:05, Session 15

Miguel Tobias Johann

Product Director

Miguel leads the Product Management Division at ModuleWorks. He has a rich background in CAM software: from programming to working as a post- and pre-sales engineer at a software reseller in Brazil, as a reseller support manager in England and a CAM product manager in France.

miguel@moduleworks.com